| The Delivery Tube
is Design to go Downward then turn upward. This will create the push
effects to change the position of fabric all the time to avoid the
crease mark.
Plaiter System
:
The end of the fabric tube is
equipped with plaiter. It can swing left to right to arrange the
fabric orderly into the "J BOX" decrease tangling and fully
utilize fabric storage space to increase capacity.
At the End
of the Tube Fabric and the water are separated similar to the
special by pass design. This can avoid the fabric being messed up by
dyeliquor. Also avoid the fabric overcrowded situation and
flooding mark.
Foam Collector :
During the dyeing process
some foam will be build up in the bath and separate from the fabric.
This avoids the fabric from flooding and problem of tangling
and foam pollution.
Fabric Speed of 0-300M/Min :
Can be
adjusted according to different fabrics.
Special Water Saving
Design :
For pure cotton the liquor ratio is 1:5-7.
Super-Low
Tension Design :
Most suitable for high class
fabric.
Internal Anti-Tangling Alarm will warn the operator
and stop the main pump immediately when the fabric is tangled on the
reel.
Advance Design Concept :
Only need to adjust the
pressure of nozzle and water level. Easy operations even for the
beginner.
The machine is equipped with advance micro computer
controller (we can also fit the machine with different controller if
the customer wants to)
Equipped with auto adding (dye
chemical) and manual adding (dye Chemical)
Total surface of
the machine goes through "Sand-Blasting" Treatment.
Special
Recommendations : This machine has produced super results with all
kinds of 100% Cotton, Viscose Rayon,Wool,Nylon. Acetate : Spandex (lycra)
|
