The finishing of the synthetic, artificial fiber made fabric and even the blended fabric has been the trouble some feature for traders as well the manufacturers. The common problems faced are :

• CRUSH MARKS

• TILTING OF THE FABRIC WHILE   CUTTING & SEWING.

• CREASE MARKS AT BOTH END OF THE FABRIC (width wise)

• CHANGE OF COLORS WHILE FINISHING.

Keeping in view all the above referred in machine models has been designed. The machine not only gives you better return of your money spent.

PROMINENT FEATURES:

STEAM CHAMBER :

The machine is fitted with a steam chamber and guide frames which adds moisture in dry fabric in a entry point.

'J' BOX : 

The fabric rests in 'J' box few seconds before being feeded into the treatment chamber, Because of the steam the fiber gets soft and the rest at 'J' box enables the fabric to absorb moisture to each core of the fiber.

ENTRY POINT :

At entry point the fabric is guided into the treatment chamber with an adjustable structure to give required width to the fabric.

TREATMENT CHAMBER :

Treatment Chamber above the entry point sis designed in such a way that it thermosets the fabric in such a form. The in built blower also helps in spreading heat in the chamber and fabric comes out of the chamber properly thermosetted (which is a must for all synthetic & blended fabrics.)

STEEL ROLLER :

The Steel Roller fitted on the top of the treatment chamber presses the thermosetted fabric to give a fine finish , the conveyer then carries the fabric to cooling device.

COOLING CHAMBER :

The Cooling chamber fitted with a blower cools the fabric as it comes out of the treatment chamber. This Process not only absorbs the heat from the fabric but also prevents the change of color which may occur if fabric remains hot for sometime.

TROLLEY :

The moving trolley fitted with adjustable electric device gives an even fold to the fabric and keeps the finished width intact.

CONTROL PANEL :

One touch control panel backed by invertors helps in easy operation of the machine . The Synchronized motors properly gives overfeeding to the fabric which helps in controlling the bowing & spirality of the fabric.

All These features make it a machine of your requirement.